KAMPANI SELELE
Rabara ea Khauta ea Shanxi & Saense ea Plastiki le Thekenoloji New Material Co., LTD.E thehiloe ka 2018. Re boetse re na le lifeme tse ling tse peli tsa makala a Jiangsu Jin Rubber & Plastic New Material Co., Ltd, Ningxia Xinchen New Materia Co., Ltd.Ke khoebo e kopaneng ea ho etsa lipatlisiso, ho hlahisa le nts'etsopele e shebaneng le boka ba polymer polyethylene, FT wax le letoto le leng la lihlahisoa tsa boka.Khamphani e fumana setereke sa Dingbian seterekeng sa Shanxi.Re na le litokelo tse tšeletseng tsa litokelo tsa molao, lipatente tse 18 tsa mohlala le lihlahisoa tse 4 tsa theknoloji e phahameng tsa profinse ea Jiangsu. Theko ea tlhahiso ke lithane tse 100,000.00 ka selemo.Lisebelisoa tse tsoetseng pele tsa tlhahiso le ts'ebetso ea tlhahiso, lisebelisoa tse tala tsa mashala li fana ka mokhoa o matla le tiisetso ea thepa bakeng sa lihlahisoa tsa rona tsa ho qetela.Sehlahisoa sa boleng bo holimo, tšebeletso e ntle e etsa hore re fumane botumo bo botle bakeng sa bareki ba malapeng le ba kantle ho naha.Re amohela ka mofuthu metsoalle eohle ea rona ho etela feme ea rona le ho sebelisana 'moho molemong oa rona
FISCHER-TROPSCH WAX (FT WAX)
| Tlhaloso | SX-F60 | SX-F70 | SX-F95 | SX-F100 | SX-F105 | SX-F110 | Tekanyetso ea teko |
| Sebaka se qhibilihang ℃ | 60±5 | 75±5 | 95±5 | 105±5 | 105±5 | 110±5 | STM D87 |
| Viscosity | 4 | 4﹣6 | 6﹣8 | 8﹣10 | 10 | 12 | ASTM D445 |
| Ho kena(dmm@25℃) | 20 | 10 | 8 | 6 | 4 | 2 | ASTM D1505 |
| Ponahalo | fola | fola | phoka/ phofo | phoka/ phofo | phoka/ phofo | Letlapa/ phofo | ASTM D1321 |
Lisebelisoa:
1.PVC Profile , liphaephe .
2.Powder ho roala resin
Sekhomaretsi sa 3.EVA se chesang se qhibilihisang
4.Tlhahiso ea rabara
5.Penta enke
6.Filled masterbatch,defoamer
Lihlahisoa tsa 7.Fiber.
Phello
1.Excellent ntle lubrication e le hantle, ntlafatsa lebelo la tlhahiso ea lihlahisoa tse felileng.
2. Ntlafatsa lubrication, fokotsa ho sebetsa toqure, fokotsa tšebeliso ea matla.
3. Ntlafatsa ho hanyetsa ha sekhomaretsi, ho omisa kapele.
4. Ntlafatsa lebelo la ho bopa, ho thehoa ha lera le ts'ireletso le lumellanang.
5. Ntlafatsa anti-scraping, ho apara ho hanyetsa, ho ntlafatsa ho lokoloha, ho thibela pigment sink.
6.Etsa phofo ea khalsiamo, phofo ea talc, calcium hydroxide le li-powders tse ling tse sa tloaelehang tse qhalakantsoeng ka karolelano.
7. Ntlafatsa khanyetso ea ho roala, matla a ho tabola, matla a anti-wrinkle, ho roka ho lokisa tekanyo ea tactile.
WAX POLYEHTYLENE (PE WAX)
| Tlhaloso | SX-100 | SX-105 | SX-110 | SX-115 | SX-118 | SX-120 | Tekanyetso ea teko |
| Sebaka se qhibilihang ℃ | 100±5 | 105±5 | 110±5 | 115±5 | 118±5 | 120±5 | ASTM D87 |
| Viscosity | 5-10 | 30-50 | 40-60 | 300-400 | 400-500 | 400-600 | ASTM D445 |
| Botenya(g/cm3@25℃ | 0.93 | 0.94 | 0.92 | 0.93 | 0.94 | 0.94 | ASTM D1505 |
| Ho kena(dmm@25℃) | 10-15 | 3﹣8 | 2﹣5 | 2﹣4 | 2﹣4 | 2﹣4 | ASTM D1321 |
| Boima ba molek'hule | 1000 | 2500 | 3000 | 4500 | 4500 | 5000 | …………… |
| Ponahalo | Phofo | phofo | phofo | phofo | phofo | phofo |
Kopo:
1.PVC profil, phala, boto e phophomang, polasetiki ea lehong.
2.Mmala Masterbatch, masterbatch e tlatsitsoeng, masterbatch e fetotsoeng, masterbatch e sebetsang.
3.PVC e tsitsitseng
4.Hot qhibiliha sekhomaretsi
5.Penta, pente, pente e tšoaeang tsela
6. boka ba parafine,
7.Tlhahiso ea rabara
Phello:
1. E sebelisoa e le lubricant e ntle ka ntle ho profil ea PVC, pipe, pipe fitti
ng, foam board, lihlahisoa tsa WPC, joalo-joalo E na le bokhoni bo botle ba ho tlotsa ka nako ea morao-rao, 'me e tla tlisa ponahalo e benyang le torque e tlase ea ts'ebetso.
2.E sebelisoa e le dispersant e sebetsang hantle ho masterbatch, fillmasterbatch, modified masterbatch le workbatch e sebetsang.E etsa hore lihlahisoa li be le likarolo tsa inorganic le li-pigments tse hasantsoeng hantle, 'me li be le ponahalo e ntle le ho feta.
3.E sebelisoa e le setlolo se setle sa kantle ho PVC stabilizer, haholo-holo Ca-Zn stabilizer.Tšebeliso e eketsehileng e loketseng lubricant ea ka hare, e tla ntlafatsa haholo phello ea kakaretso ea stabilizer le ho eketsa litšenyehelo tse lekaneng.
4.E sebelisoa ka li-adhesives tse chesang tse qhibilihisang li ka fetola hantle lihlahisoa tsa viscosity le ho thatafala, ho ntlafatsa metsi a eona.
5.E sebelisoa ka pente, ho roala le pente ea ho tšoaea litsela, ts'ebetso ea eona e ka sehloohong ke ho hanyetsa mocheso, ho senya, ho lekanngoa, ho thibela ho beha le ho hasana.E ka eketsa ho tiea ha lihlahisoa holim'a lihlahisoa, ho hana ho apara le thepa e khahlanong le ho tlotsa.
6. E sebelisoa e le mofetoleli ka boka ba parafine, 'me e ntlafatsa ntlha e qhibilihang ea parafine, crystallinity, joalo-joalo.
7.E sebelisoa e le moemeli oa ho lokolla le moemeli oa tšireletso ka rabara.
| OXIDIDED POLYEHTYLENE WAKS | ||||
| Tlhaloso | SX-36 | SX-37 | SX-62 | SX-60 |
| Sebaka sa ho nolofatsa ℃ | 140±5 | 140±5 | 100±5 | 95±5 |
| Botenya(g/cm3@25℃ | 0.98-1 | 0.98-099 | 0.92-0,95 | 0.92-0,95 |
| Ho kena(dmm@25℃) | ≤1 | ≤1 | ≤5 | ≤4 |
| Viscosity (cps@140℃) | 8500-1100 | 10000-15000 | 200±50 | 100±50 |
| Boleng ba asiti(mgKOH/g) | 16±2 | 7-18 | 30±2 | 20±5 |
| Ponahalo | phofo | phofo | phofo | phofo |
Phello
1. Ka tumellano e ntle, ho fana ka lubrication e ntle ea kahare le kantle, ho hasana
Ntlafatsa boreleli ba holim'a metsi, u khothalletse ho potlaka ha polasetiki le chai
2. Emulsifier e ntle ea ho hasana, moemeli oa ho lokolla, ho ntlafatsa ho feto-fetoha ha maemo le ho hanyetsa mongobo
3. Eketsa matla ,gloss,combustion complet ,ha ho mosi o motšo .
4. Ntlafatsa ho hasana, ntlafatsa ponahalo ea sehlahisoa se felileng
Kopo
1. Ka filimi ea PVC, profil, pipe, polasetiki
2. Kamora ho emulsification bakeng sa indasteri ea pampiri, indasteri ea khatiso le ea ho shoa le ea liaparo, enke e thehiloeng metsing, pholishe ea lieta e thehiloeng metsing.
3. Lihlahisoa tsa boka
4. Sekhomaretsi se chesang se qhibiliha, sekhomaretsi.
| MICRONized POLYEHTYLENE WAX | |||||||||||
| Tlhaloso | MPE-85 | MPE-51 | MPE-43 | MPE-27 | MPE-26 | MPE-25 | MPE-22 | MPE-21 | MPE-20 | MPE-15 | |
| Sebaka se qhibilihang ℃ | 137 | 115 | 97-103 | 126 | 125-128 | 115 | 110 | 110 | 110 | 108-116 | |
| Boholo ba karolo μm | Tlhaloso: DV50 | 6 | 10 | 4-6 | 6 | 6-8 | 8-10 | 5-6 | 4-6 | 7 | 4-6 |
| Tlhaloso: DV90 | 12 | 14 | 9 | 14 | 11-13 | 14 | 12 | 9 | 18 | 9 | |
| Ponahalo | phofo | phofo | phofo | phofo | phofo | phofo | phofo | phofo | phofo | phofo | |
Phello
1. Bothata bo botle, ho hanyetsa ho roala, ho thibela ho khomarela le ho hanyetsa matheba, ho ntlafatsa ho hanyetsa ha abrasion, ho hanyetsa ho hlaba le maikutlo a boreleli.
2. Anti-adhesion, phello ea ho timela ke ho sila le ho thella ho totobetseng, ho penta hape, ho thibela ho teba, ho kenella ha moea hantle, ho ntlafatsa moholi oa letsoai le phello e thibelang mongobo, pente ho ntlafatsa ts'ebetso ea ho tlosa pente, ho ntlafatsa boemo ba ho baka enamel. .
3.The friction coefficient e tlase haholo, e phahameng ea ho apara ho hanyetsa, ho thella, ho hanyetsa mocheso, ho hanyetsa mocheso, ho hanyetsa ha kutu, ho hanyetsa lik'hemik'hale.
4. Sebaka se phahameng sa ho qhibiliha, ho hanyetsa ho khomarela, lubricity, ho hasana hantle, ho ntlafatsa ho hanyetsa ho apara ha enke, ho pepeseha.
5, E ka fana ka botsitso le botsitso ba mocheso, ho roala hamonate joalo-joalo.
Kopo
1. Pente ea lehong, pente ea indasteri, pente ea phofo.
2. Ho penta le ho penta manufactruing .
3. LIPITŠA, likhoeli, lipehelo tsa lepolanka, ho roala phofo le enke ea khatiso.
4. Thehiloeng ka metsi, solvent enke barbotage
5.Tlhahiso ea letlalo
